Handle 4355-56 3D Model
Interactive 3D model of 4355-56 handle from NRH. Rotate, zoom, and inspect every detail before requesting a quote.
- Model Number4355-56
- CategoryHandles
- MaterialCold-Rolled Carbon Steel (SPCC)
- Surface FinishZinc Plated
- ColorBlue Zinc Plated
- Working Load40kg
Product Overview
Built for heavy-duty industrial environments, the 4355-56 handle provides strong, dependable load-bearing performance for heavy doors, large equipment cabinets, and industrial enclosures. The reinforced construction ensures reliable performance even under demanding conditions.
Design & Construction
This heavy-duty handle is built with industrial-grade construction for maximum strength and durability. The thick-gauge material and reinforced mounting points are sized for heavy loads and frequent use in demanding environments. The grip area is wide and robust, providing ample surface for operators pulling with significant force or working in challenging conditions.
Materials & Finish
Crafted from strong Cold-Rolled Carbon Steel (SPCC) with a protective Zinc Plated coating, the 4355-56 handle delivers robust performance and good corrosion resistance for industrial applications. The steel construction provides the structural strength needed for heavy pulling forces, while the surface finish ensures the handle maintains its appearance and resistance to corrosion.
Performance & Specifications
Built for heavy-duty industrial service, the 4355-56 handle provides exceptional pull strength and durability for heavy doors and large enclosures. The heavy-gauge construction resists bending and maintains structural integrity under heavy use. All mounting points are reinforced for maximum load distribution and long-term reliability. Rated pull capacity: 40kg.
Typical Applications
The 4355-56 heavy-duty handle is built for heavy industrial doors, large equipment enclosures, and machinery access panels where substantial structural performance is essential. Primary applications include heavy manufacturing equipment enclosures, large electrical switchgear doors, industrial machine guards and access doors, and heavy storage cabinetry. The robust construction ensures the handle can handle frequent, heavy use by operators wearing work gloves in demanding industrial environments.
Installation & Usage
Installation of the 4355-56 heavy-duty handle requires robust mounting to withstand substantial pulling forces. The mounting structure must be structurally sound and capable of supporting the rated pull load without failure. Begin by carefully determining handle placement on heavy doors or panels, considering both ergonomic access and the structural limitations of the mounting surface. Reinforce the mounting area with back-up plates or structural support if the panel material is insufficient on its own. Mark and drill mounting holes for heavy-duty through-bolts or studs. Install the handle using high-strength fasteners with washers and back-up support on the blind side. Tighten all fasteners to the specified torque. Test the installation with deliberate heavy pulls to verify secure mounting and structural integrity. Establish a regular inspection schedule to check for any loosening or wear over the service life.
Why Choose NRH
With over 25 years of experience in industrial hardware manufacturing, NRH has established itself as a trusted supplier for OEMs, distributors, and engineering teams worldwide. Our commitment to quality, consistent performance, and responsive customer support sets us apart in the global hardware market.
Every Handle in our 3D model library is produced under strict quality control standards. We offer comprehensive customization services, including custom sizes, modified finishes, and OEM branding to meet your specific project requirements. Contact our engineering team for technical support or custom solutions.
Specifications
| Model Number | 4355-56 |
|---|---|
| Product Category | Handles |
| Material | Cold-Rolled Carbon Steel (SPCC) |
| Surface Finish | Zinc Plated |
| Color | Blue Zinc Plated |
| Working Load | 40kg |
| Brand | NRH |
Frequently Asked Questions
The 4355-56 handle has a working load capacity of 40kg. This rating represents the maximum recommended load for normal operating conditions. Actual performance may vary based on installation method, load distribution, and environmental factors.
The 4355-56 is constructed from Cold-Rolled Carbon Steel (SPCC) with a Zinc Plated finish. This material is selected for its durability, structural strength, and reliable performance in standard industrial environments.
The 4355-56 handle is suitable for a wide range of Heavy-duty industrial applications, including heavy equipment doors, large enclosures, and industrial machinery. Its heavy-duty rating makes it ideal for demanding industrial environments where strength and durability are critical. For specific application questions, contact our technical support team.
Yes, NRH offers comprehensive customization services for the 4355-56, including custom sizes, modified finishes, special materials, and OEM branding options. We work closely with OEMs, engineering teams, and distributors to develop solutions tailored to specific application requirements. Contact our sales team to discuss your customization needs.
Installation of the 4355-56 is straightforward using standard fasteners appropriate for your mounting surface. Ensure proper alignment before final tightening, and follow recommended torque specifications for the fastener size used. For detailed installation guidance or technical support, contact our engineering team who can provide specific recommendations based on your application and mounting materials.
